# Sewer Line Cost Estimator for Los Angeles | Angeleno Sewer Line Repair

> Free sewer line cost estimator for Los Angeles: lining, pipe bursting, spot repair and replacement ranges, plus City street fees. No phone call needed to get a number.

URL: https://lasewerlinerepair.com/tools/sewer-line-cost-estimator/

## Sewer Line Cost Estimator for Los Angeles

Pick the kind of work, enter the footage, and get a budgeting range for a Los Angeles-area sewer line job, with the City's street fees itemized when the work reaches the main. No contact details needed.

Budgeting range, LA area, October 2026

$6,750–$12,500

$135–$250 per foot × 50 ft. A typical whole job of this kind runs $6,000–$15,000.

Needs an open, round pipe. Does not correct a belly. Access pits and a new cleanout are extra if needed.

Compiled from published Los Angeles-area cost data. Not a quote or a company rate. Depth, access, hardscape and what the camera finds decide the real number.

### How the estimate is built

For lining and pipe bursting, the estimator multiplies your footage by the researched per-foot range: $135–$250 per foot for lining and $145–$300 per foot for bursting. Those per-foot figures cover the liner or new pipe and the core work; access pits, a new cleanout and street work sit outside them. For a spot repair, camera inspection or clearing visit, it shows the typical job range, because those jobs are not priced by the foot.

Full open-trench replacement shows $5,000 to $25,000 or more. The published Los Angeles data does not support a defensible per-foot figure for trenching, because so much of the cost is restoration, depth and shoring rather than pipe.

### What pushes a job to either end

Length and depth come first. After that, the surface decides most of it: a line under lawn is cheaper to reach than one under a driveway, patio or mature tree. Hillside access, narrow side yards, groundwater near the river and a missing cleanout all add time. In the City of Los Angeles, any work past the property line adds an S-Permit, a City Bonded Sewer Contractor, inspection, traffic control and a street restoration fee.

### Why the camera comes before the number

The estimator assumes you know what kind of work the line needs. Usually you only know that after the line has been filmed. If you are not sure yet, start with the camera inspection range, then come back once the footage shows whether the problem is one joint or the whole line. The [inspection report guide](/guide/how-to-read-a-sewer-inspection-report/) explains what to look for, and the [replacement cost guide](/guide/sewer-line-replacement-cost-los-angeles/) covers each driver in more depth.

If you are in the City of Los Angeles, LA Sanitation's rebates can offset part of the cost: up to $300 for a camera inspection and up to $2,500 for a lateral repair, while funds last. See the [rebate guide](/guide/la-sewer-lateral-rebate/).

### Questions people ask

#### How accurate is this sewer line cost estimator?

It gives a budgeting range, not a quote. The ranges come from published Los Angeles-area cost data as of October 2026, and the City fees come from the Bureau of Engineering schedule. Depth, access, what sits over the line and what the camera finds decide the real number.

#### Why does the estimator not calculate open-trench replacement by the foot?

Because the published LA data does not support a reliable per-foot figure for it. Trench cost depends heavily on restoration, depth and shoring, so the estimator shows the researched job range instead of false precision.

#### Are permits included in the estimate?

Private-side LADBS permit fees are small and not itemized. If you mark that the work reaches the street, the estimator lists the City S-Permit, the per-foot inspection fee and the street restoration rates separately.